Biomass gas generator set
Ⅰ、Introduction of biomass gas power generation technology
Biomass gas (biosyngas) is a combustible gas produced by crop straw, forest waste, edible fungus residue, livestock waste, sewage and sludge as raw materials. Biomass gas contains hydrogen 15.27%, oxygen 3.12%, 3.12%, nitrogen 56.22%, methane 1.57%, carbon monoxide 9.76%, carbon 213.75%, ethylene 0.10%, ethane 0.13%, propane 0.03%, propylene 0.05%.
Biomass gasification power generation technology refers to the conversion of biomass into gas fuel in the gasifier and directly into the gas machine to burn power drive generator after purification. The gas from biomass gasification contains certain impurities, including ash, coke and tar, which need to be removed through the purification system to ensure the normal operation of the power generation equipment.
Puyang Shengli new energy biomass gas generator set is integrated into the industry-leading gas combustion control, electric control mixer and other technologies, which can automatically control the air-fuel ratio. The unit has the characteristics of safety, reliability, high heat efficiency, high cost performance and full automatic operation management. The straw gas generator set stable operation, simple operation, high automation degree, economic benefits and environmental protection requirements, limited raw materials, rice shell, straw, wood chips, wood chips, coconut shell, palm shell, corn straw, corn core, corn pole, cane bagasse, mango core, peanut shell and other agricultural and forestry waste for raw materials. This series of units can replace imported products, the complete machine technology is in the leading level in China.
Our factory can configure a single biomass gas generator set covering 100KW-800kw according to the actual needs of the customer. For projects with an installed capacity of more than 1MW, we suggest that customers use multiple 500KW units parallel, with the highest comprehensive cost performance. The station is more stable, convenient maintenance and low maintenance cost.
Biomass gasification power generation system is divided into five parts: 1. Gasifier; 2. gas purification system; 3. carbon output system; 4. power generation system; 5. Equipment control system. The principle is that high-temperature anaerobic combustion produces combustible gas in the gasifier (gas calorific value is greater than 1000Kcal), the gas can pass through the cyclone separator, wet purification equipment (dry purification system in some parts), gas-liquid separation equipment, electrostatic focus catcher, cooling the gas temperature less than 40 ℃, and then enter the gas generator set for power. The rice shell charcoal after gasification can be recycled through the carbon powder collecting unit. The whole set of equipment does not need for manual operation, through the control room to control the feeding, discharge the whole process, and real-time monitoring of temperature, pressure and gas composition, and fixed-point recording.
Ⅱ、Specification, model and technical parameters of biomass gas generator set (part):
Electrical index of the unit: rated frequency 50HZ (60HZ optional), power factor COS =0.8, rated voltage 400 / 230V, phase line: three-phase four-wire system;
If you contact us for additional information on the unit, biomass gas generator set quotes or unshown power model unit parameters.
Ⅲ、Technical description of biomass gas generator set
1. Standard environmental conditions of generator set
The total atmospheric pressure of 100kPa; The ambient air temperature is 25 ℃; the relative humidity is 30%; when the gas source quality meets the technical requirements, the generator set can reach the rated load output.
2. Supporting generator is optional
The generators supporting the unit are well-known brands at home and abroad: Lilsenma, Siemens, Stanford, Marathon, Inge, Elma, etc.
Warranty period: 12 months after domestic commissioning acceptance or 1000 hours; expire first. Due to product quality problems, free maintenance or replacement, lifetime paid service! (Damable parts, common used parts, human damage, negligent maintenance, etc. are not within the warranty scope) If the original factory adjustment is implemented, the original factory consolidation regulations!
After the shelf life, users enjoy the lifetime maintenance of the product, accessories replacement only costs, no labor fees. In case of serious product loss or special circumstances, we can go to the company for overhaul or replace the machine.
Users can call the after-sales service team if the product is inconvenient or needs to provide technical support. We will send a commissioner to the site for inspection and repair after receiving the phone call or fax, and continue to resume the product operation as quickly as possible.
Puyang Shengdong New Energy Co., Ltd. is a biomass gas generator set manufacturer, the product quality is reliable, welcome customers to call and consult!